Archived
CASL Technical Reports
Unable to find the report / document you are looking for? Use our Document Request Form to request a specific document / report.
2017
- Jones, C., Hetzler, A., Dinh, N., Athe, P., Sieger, M., Initial Verification and Validation Assessment for VERA, CASL Technical Report: CASL-U-2017-1310-000, April 30, 2017.
- Godfrey, A.T., Collins, B.S., Gentry, C.A., Stimpson, S.G., Ritchie, J.A., Watts Bar Unit 2 Startup Results with VERA, CASL Technical Report: CASL-U-2017-1306-000, March 31, 2017.
2016
- Palmtag, S.MPACT Library Verification by Comparison of Assembly Calculations to Monte Carlo Results, CASL-U-2016-1052-000, March 31, 2016.
- Khuwaileh, B.A., Turinsky, P.J., Data Assimilation and Uncertainty Quantification Using VERA-CS for a Core Wide LWR Problem with Depletion, CASL Technical Report: CASL-U-2016-1054-000, March 23, 2016.
- Palmtag, S.Investigation of Thermal Expansion Effects in MPACT, CASL-U-2016-1015-000, February 28, 2016.
- Palmtag, S.MPACT Library Verification by Comparison of Pincell Calculations to Monte Carlo Results, CASL Technical Report: CASL-U-2015-0281-001, July 14, 2015.
- Salko, R., Wysocki, A., Collins, B.S., Godfrey, A.T., Gosdin, C., Avramova, M., Development and Testing of CTF to Support Modeling of BWR Operating Conditions, CASL Technical Report: CASL-U-2016-1030-000, January 20, 2016.
2015
- Capps, N., Liu, W., Montgomery, R., Pytel, M., Rashid, J., Spencer, B., Sunderland, D., Williamson, R., Wirth, B.D., Demonstrate 3D PCI analysis with BISONCASL for PCI fuel failure in a commercial power reactor, CASL Technical Report: CASL-U-2015-1016-000, September 30, 2015.
- Salazar, D., Franceschini, F., VERA Modeling and Simulation of the AP1000 PWR Cycle 1 Depletion, CASL Technical Report: CASL-U-2015-0302-000, September 30, 2015.
- Coyle, C., Phillips, B., Lowder, S., Buongiorno, J., McKrell, T., Synthesis of CRUD and its Effects on Pool and Subcooled Flow Boiling, CASL Technical Report: CASL-U-2015-0319-000, September 30, 2015.
- Nadiga, B.T., M. Berndt and A. Bauer, Document the Progress Made on Developing Multi-Phase Capabilities in Hydra-TH (LA-UR-15-26503 Version 2), CASL Technical Report: CASL-U-2015-0296-000, August 18, 2015.
- Kochunas, B., D. Jabaay, A. Fitzgerald and T. Downar, Initial BWR Modeling Capability for MPACT – (FY15.CASL.006), CASL Technical Report: CASL-U-2015-0265-000, July 31, 2015.
- Godfrey, A.T., B.S. Collins, K.S. Kim, R. Lee, J. Powers, R. Salko, S.G. Stimpson, W.A. Wieselquist, R. Montgomery, R. Montgomery, B. Kochunas, D.R. Jabaay, N. Capps and J. Secker, VERA Benchmarking Results For Watts Bar Nuclear Plant, CASL Technical Report: CASL-U-2015-0206-000, June 26, 2015.
- Keady, K.P., and E.W. Larsen, Stability of Monte Carlo k-Eigenvalue Simulations with CMFD Feedback, CASL Technical Report: CASL-U-2015-0223-000, May 28, 2015.
- Keady, K.P., and E.W. Larsen, Stability of SN K=Eigenvalue Iterations using CMFD Acceleration, CASL Technical Report: CASL-U-2015-0224-000, May 28, 2015.
- Stimpson, S.G., An Azimuthal, Fourier Moment-Based Axial SN Solver for the 2D/1D Scheme, CASL Technical Report: CASL-U-2015-0149-000, May 19, 2015.
- Adams, B.M., M.S. Ebeida, M.S. Eldred, J.D. Jakeman, L.P. Swiler, J.A. Stephens, D.M. Vigil, T.M. Wildey, W.J. Bohnhoff, K.R. Dalbey, J.P. Eddy, K.T. Hu, L.E. Bauman and P.D. Hough, DAKOTA: A Multilevel Parallel Object-Oriented Framework for Design Optimization, Parameter Estimation, Uncertainty Quantification, and Sensitivity Analysis: Version 6.2 Theory Manual, CASL Technical Report: CASL-U-2015-0090-000, May 8, 2015.
- Capps, N., B.D. Wirth, R. Montgomery, D. Sunderland, B. Spencer and M. Pytel, Evaluation of Missing Pellet Surface Geometry on Cladding Stress Distribution and Magnitude, CASL Technical Report: CASL-U-2015-0189-000, May 1, 2015.
- Downar, T., B. Kochunas and B. Collins, MPACT Verification and Validation: Status and Plans, CASL Technical Report: CASL-U-2015-0134-000, April 30, 2015.
- Kulesza, J.A., S.G. Stimpson, A.R. Gerlach and D.R. Jabaay, Babcock & Wilcox Critical Experiment Calculations to Support MPACT Verification, CASL Technical Report: CASL-U-2015-0143-000, April 24, 2015.
- Coyle, C., J. Buongiorno and T. McKrell, Synthesis of CRUD and its Effects On Pool and Subcooled Flow Boiling – CASL L3 Milestone Report, CASL Technical Report: CASL-U-2015-0068-000, March 31, 2015.
- Fang, J., I.A. Bolotnov, J. Lu and G. Tryggvason, L3:THM.CLS.P11.01 Interim Report: ITM/DNS for High Volume Fraction Bubbly Flow Regimes, Machine Learning for Closure Support, CASL Technical Report: CASL-U-2015-0095-000, March 31, 2015.
- Forget, B., C. Josey, P. Ducru and J. Walsh, Progress on the Implementation and Testing of On-The-Fly Doppler Broadening for Monte Carlo Simulations, CASL Technical Report: CASL-U-2015-0160-000, March 31, 2015.
- Liu, Y., and W. Martin, Implementation and Preliminary Verification of the Quasi-1D Kernel for Intra-pin Resonance Physics in MPACT, CASL Technical Report: CASL-U-2015-0116-000, March 16, 2015.
- Palmtag, S., Initial Boiling Water Reactor (BWR) Input Specifications, CASL Technical Report: CASL-U-2015-0040-000, February 28, 2015.
- Palmtag, S., and A. Godfrey, User Manual for the VERA Input Processor, CASL Technical Report: CASL-U-2014-0014-002, February 28, 2015.
- Kochunas, B., D. Jabaay and T. Downar, VERA Problem 10: Restart and Shuffling in MPACT, Revision 1, CASL Technical Report: CASL-U-2014-0231-001, February 26, 2015.
- Gurecky, W., and E. Schneider, MCNPX Simulations of WBNP Unit 1 with Keno Comparisons, CASL Technical Report: CASL-U-2015-0221-000, February 20, 2015.
- Williamson, R., Contact Memory Report CASL.FY14, CASL Technical Report: CASL-U-2015-0021-000, January 30, 2015.
2014
- Evans, T.M., and S. Hamilton, Efficient Solution of the Simplified PN Equations, CASL Technical Report: CASL-U-2014-0352-000, December 29, 2014.
- Clarno, K.T., and R.P. Pawlowski, Incorporate MPACT into TIAMAT and Demonstrate Pellet-Clad Interaction (PCI) Calculations, CASL Technical Report: CASL-U-2015-0022-000, December 16, 2014.
- Blyth, T.S., Improvement of COBRA-TF Subchannel Thermal-Hydraulics Code (CTF) using Computational Fluid Dynamics, CASL Technical Report CASL-U-2015-0020-000, December 15, 2014.
- Torres-Tan, S.A., Coupled Fluid Structure Simulations for Application to Grid-to-Rod Fretting, December 15, 2014.
- Walker, E.D., Modeling Integral Fuel Burnable Absorbers Using the Method of Characteristics, CASL Technical Report: CASL-U-2015-0015-000, December 1, 2014.
- Adams, B.M., M.S. Ebeida, M.S. Eldred, J.D. Jakeman, L.P. Swiler, J.A. Stephens, D.M. Vigil, T.M. Wildey, W.J. Bohnhoff, K.R. Dalbey, J.P. Eddy, K.T. Hu, L.E. Bauman and P.D. Hough, DAKOTA: A Multilevel Parallel Object-Oriented Framework for Design Optimization, Parameter Estimation, Uncertainty Quantification, and Sensitivity Analysis: Version 6.1 Reference Manual, CASL Technical Report: CASL-U-2015-0089-000, November 7, 2014.
- Adams, B.M., M.S. Ebeida, M.S. Eldred, J.D. Jakeman, L.P. Swiler, J.A. Stephens, D.M. Vigil, T.M. Wildey, W.J. Bohnhoff, K.R. Dalbey, J.P. Eddy, K.T. Hu, L.E. Bauman and P.D. Hough, DAKOTA: A Multilevel Parallel Object-Oriented Framework for Design Optimization, Parameter Estimation, Uncertainty Quantification, and Sensitivity Analysis: Version 6.1 Theory Manual, CASL Technical Report: CASL-U-2015-0090-000, November 7, 2014.
- Adams, B.M., M.S. Ebeida, M.S. Eldred, J.D. Jakeman, L.P. Swiler, J.A. Stephens, D.M. Vigil, T.M. Wildey, K.T. Hu, W.J. Bohnhoff, K.R. Dalbey, J.P. Eddy, L.E. Bauman and P.D. Hough, DAKOTA: A Multilevel Parallel Object-Oriented Framework for Design Optimization, Parameter Estimation, Uncertainty Quantification, and Sensitivity Analysis: Version 6.1 User’s Manual, CASL Technical Report: CASL_U-2015-0087-000, November 7, 2014.
- Adams, B.M., M.S. Ebeida, W. Eldred, J.D. Jakeman, L.P. Swiler, J.A. Stephens, D.M. Vigil, T.M. Wildey, W.J. Bohnhoff, K.R. Dalbey, J.P. Eddy, K.T. Hu, L.E. Bauman and P.D. Hough, DAKOTA: A Multilevel Parallel Object-Oriented Framework for Design Optimization, Parameter Estimation, Uncertainty Quantification, and Sensitivity Analysis: Version 6.1 Developers Manual, CASL Technical Report: CASL-U-2015-0088-000, November 7, 2014.
- Stagg, A.K., M.A. Christon and K. Frick, Native Conjugate Heat Transfer (CHT), CASL Technical Report CASL-U-2014-0214-000, October 22, 2014.
- Godfrey, A., VERA-CS Validation Activities Matrix, CASL Technical Report: CASL-U-2014-0185-000-b, October 21, 2014.
- Godfrey, A., VERA-CS Validation Plan, CASL Technical Report: CASL-U-2014-0185-000, October 21, 2014.
- Stanek, C., Atomistically Informed Model of Thermal and Irradiation Creep in Zirconium (LA-UR-14-27758), CASL Technical Report: CASL-U-2011-0177-000, October 6, 2014.
- Stanek, C.R., C. Tome, R. Montgomery and W. Liu, Demonstration of Atomistically-informed Multiscale Zr Alloy Deformation Models in Peregrine for Normal and Accident Scenarios, CASL Technical Report: CASL-U-2014-0201-000 (LA-UR-14-27758), October 6, 2014.
- Stanek, C.R., C. Tome, R. Montgomery and W. Lui, Demonstration of Atomistically-informed Multiscale Zr Alloy Deformation Models in Peregrine for Normal and Accident Scenarios (LA-UR-14-27758), CASL Technical Report: CASL-U-2014-0201-000, October 6, 2014.
- Allison, L., R.C. Smith and B. Williams, An Information Theoretic Approach to Use High-Fidelity Codes to Calibrate Low-Fidelity Codes, CASL Technical Report: CASL-U-2014-0197-000, September 30, 2014.
- Hassan, Y.A., Full-Field Measurements of Turbulent Bubby Flow using Innovative Experimental Techniques, CASL Technical Report CASL-U-2014-0209-000, September 30, 2014.
- Hess, S., D. Hussey, B.T. Mervin, M. Pytel, R. Montgomery and F. Franceschini, Update to Industry Test Stand Experience Using VERA, CASL Technical Report CASL-U-2014-0187-000, September 30, 2014.
- Hess, S., D. Hussey, B.T. Mervin, M. Pytel, R. Montgomery and F. Franceschini, Update to Industry Test Stand Experience Using VERA, CASL Technical Report: CASL-U-2014-0187-000, September 30, 2014.
- Liu, Y., M. Srivastava and N. Dinh, Micro-hydrodynamics in High Heat Flux Boiling and Burnout: Experimental Data and Model Development, CASL Technical Report: CASL-U-2014-0211-000, September 30, 2014.
- Lu, J., and G. Tryggvason, Transient Evolution and Dispersion of Bubbles in a Channel and Data Mining, CASL Technical Report: CASL-U-2014-0208-000, September 30, 2014.
- Mousseau, V., N. Belcourt, R. Salko, K. Ivanov, M. Avramova and M. Doster, Cobra-TF Parameter Exposure Work, CASL Technical Report: CASL-U-2014-0198-000, September 30, 2014.
- Salko, R., Development of CTF Capability for Modeling Reactor Operating Cycles with Crud Growth, CASL Technical Report: CASL-U-2014-0188-000, September 30, 2014.
- Thomas, D., and G. Swindlehurst, Implementation of the Transient Capability in MPACT: Phase II, CASL Technical Report: CASL-U-2014-0186-000, September 30, 2014.
- Xia, Y., and H. Luo, Single/Multiphase CFD Assessment, Verification, and Validation, CASL Technical Report: CASL-U-2014-0210-000, September 30, 2014.
- Smith, T., and M.A. Christon, Enhanced Turbulence Model Capabilities in Hydra-TH, CASL Technical Report CASL-U-2014-0194-000, September 26, 2014.
- Spencer, B.W., J.D. Hales, D.R. Gaston, D.A. Karpeev, R.L. Williamson, S.R. Novascon, D.M. Perez, R.J. Gardner and K.A. Gamble, BISON Contact Improvements CASL FY14 Report, CASL Technical Report: CASL-U-2014-0213-000 (INL/EXT-14-33285), September 20, 2014.
- Podowski, M., RPI Milestone: Development of a Mechanistic Subcooled Boiling Model for PWR Assemblies, CASL Technical Report: CASL-U-2015-0113-000, August 31, 2014.
- Baglietto, E., and M.A. Christon, Single Phase Validation of Hydra-TH for Fuel Applications, CASL Technical Report CASL-U-2014-0154-000, August 30, 2014.
- Becker, T., A.V. Struggles and S. Pannala, Integrated Lift- and Wall-Force Closures in Computational Fluid Dynamics (CMFD), CASL Technical Report: CASL-U-2014-0170-000, August 29, 2014.
- Godfrey, A., VERA Core Physics Benchmark Progression Problem Specifications, Revision 4, CASL Technical Report: CASL-U-2012-0131-004, August 29, 2014.
- Winfrey, L., CASL Summer Workshop Report 2014, CASL Technical Report: CASL-U-2014-0166-000, August 28, 2014.
- Salko, R., T.S. Blyth, J. Mageganz and M.N. Avramova, Coolant-Boiling in Rod Arrays – Two Fluids (CTF) Validation, CASL Technical Report CASL-U-2014-0169-000, August 20, 2014.
- Collins, B., A. Graham, A. Zhu, B. Kochunas and T. Downar, Demonstration of Full Core Reactor Depletion with MPACT, CASL Technical Report: CASL-U-2014-0140-000, August 10, 2014.
- Liu, Y., W. Martin, M. Williams and K.S. Kim, Resonance Self-shielding Method for Fuel Annular Subdivisions Using Quasi-1D Slowing-down Solution, CASL Technical Report CASL-U-2014-0123-000-a, August 2, 2014.
- Liu, Y., W. Martin and K.S. Kim, Resonance Self-shielding Method for Fuel Annular Subdivisions Using Quasi-1D Slowing-down Solution, CASL Technical Report CASL-U-2014-0123-000-a, August 2, 2014.
- Carpenter, J., N. Belcourt and R. Nourgaliev, General purpose steam table library : CASL L3:THM.CFD.P7.04 milestone report, SAND2013-SAND7328 473787, August 1, 2014.
- Mervin, B., M. Pytel, D. Hussey and S. Hess, EPRI Test Stand Report: Results and Feedback from the EPRI Test Stand, CASL Technical Report: CASL-U-2014-0121-000-a, August 1, 2014.
- Hamilton, S., M.A. Berrilla, K.T. Clarno and R.P. Pawlowski, An Assessment of Coupling Algorithms for Nuclear Reactor Core Physics Simulations, CASL Technical Report: CASL-U-2014-0149-000-b, July 31, 2014.
- Slattery, S.R., Mesh-Free Data Transfer Algorithms for Partitioned Multiphysics Problems: Conservation, Accuracy, and Parallelism, CASL Technical Report: CASL-U-2014-0128-000, July 31, 2014.
- Kothe, D., CASL Round Table Meeting, CASL Technical Report CASL-U-2014-0116-000, July 14, 2014.
- Kochunas, B., W.A. Wieselquist, A. Zhu and K.S. Kim, ORIGEN Integration into MPACT, CASL Technical Report: CASL-U-2014-0114-000, July 4, 2014.
- Gilman, L., Development of a General Purpose Subgrid Wall Boiling Model from Improved Physical Understanding for Use in Computational Fluid Dynamics, CASL Technical Report: CASL-U-2014-0205-000, June 30, 2014.
- Kenner, K., Modeling an iPWR Startup Core Cycle with VERA, CASL Technical Report: CASL-U-2014-0069-001, June 26, 2014.
- Sly, N.C., Verification of the Shift Monte Carlo Code Using the C5G7 and CASL Benchmark Problems, CASL Technical Report: CASL-U-2014-0142-000, May 30, 2014.
- Noordhoek, M.J., T. Liang, T. Chiang, S.B. Sinnott and S.R. Phillpot, Mechanisms of Zr Surface Corrosion Determined via Molecular Dynamics Simulations with Charge-Optimized Many-Body (COMB) Potentials, CASL Tecnnical Report CASL-U-2014-0217-000, May 14, 2014.
- Hayrapetian, A.V., and M.J. Demkowicz, Microscale Model for Simulating Fretting Wear of Brittle Materials with Third-body Wear Debris Interaction, CASL Technical Report CASL-U-2014-0139-000, May 8, 2014.
- Godfrey, A., S. Palmtag, G. Davidson and B. Collins, VERAOUT – VERA HDF5 Output Specification, CASL Technical Report CASL-U-2014-0043-001, May 2, 2014.
- Berrilla, M.A., K.T. Clarno and S.P. Hamilton, Evaluation of Coupling Approaches, CASL Technical Report: CASL-U-2014-0081-000, May 1, 2014.
- Murphy, S., E. Jay and R.W. Grimes, Pipe Diffusion at Dislocations in UO2, CASL-U-2014-0126-000, May 1, 2014.
- Bartlett, R., Generic TriBITS PRoject, Build, Test, and Install Quick Reference Guide, CASL Technical Report: CASL-U-2014-0075-000-a, March 31, 2014.
- Bartlett, R., TriBITS Develops Guide and Reference, CASL Technical Report: CASL-U-2014-0075-b, March 31, 2014.
- Godfrey, A., MPACT Testing and Benchmarking Results, CASL Technical Report: CASL-U-2014-0045-000, March 31, 2014.
- Yixing, S., J. Yan, C. Liping, V. Kucukboyaci, E. Tatli, M.A. Christon, R. Salko and H. Zhang, Assessment of Multi-Scale Thermal-Hydraulic Codes and Models for DNB Challenge Problem Applications, CASL Technical Report: CASL-U-2014-0032-000, March 31, 2014.
- Adams, B., R. Hooper, R.C. Smith and B. Williams, VUQ Milestone Review: User Guidelines and Best Practices for CASL VUQ Analysis Using Dakota, CASL Technical Report: CASL-U-2014-0038-000-b, March 28, 2014.
- Williams, B.J., L.P. Swiler, R. Hooper, A. Lewis, J.A. McMahan, R.C. Smith and B.M. Adams, User Guidelines and Best Practices for CASL VUQ Analysis Using Dakota, CASL Technical Report: CASL-U-2014-0038-000 (SAND2014-SAND2864 517358), March 28, 2014.
- Franceschini, F., A. Godfrey, J. Kulesza and R. Oelrich, Westinghouse VERA Test Stand – Zero Power Physics Test Simulations for the AP1000 PWR, CASL Technical Report: CASL-U-2014-0012-001, March 2014.
- Jin, M., and M. Short, Two-Phase Fluid Flow Modeling in CRUD using MAMBA-BDM, CASL Technical Report CASL-U-2014-0143-000, February 17, 2014.
2013
- Tamang, A., A Multilevel Method for Solving Neutron Kinetics Equations Coupled with the Heat Transfer Equation, December 31, 2013.
- Palmtag, S., Demonstration and Neutronics Coupled to Thermal-Hydraulics for a Full-Core Problem using VERA, CASL Technical Report: CASL-U-2013-0196-000, December 30, 2013.
- Baglietto, E., and M. Christon, Demonstration & Assessment of Advanced Modeling Capabilities to Multiphase Flow with Sub-Cooled Boiling, CASL Technical Report: CASL-U-2013-0181-001, December 23, 2013.
- Evans, T.M., F. Franceschini, A. Godfrey, S. Hamilton, W. Joubert and J. Turner, High-Fidelity Neutronic Analysis of the Westinghouse AP1000, CASL Technical Report: CASL-U-2013-0231-000, December 4, 2013.
- Collins, B., S. Stimpson, B. Kochunas and T. Downar, Application of MPACT 2D/1D to AMA Benchmark Problem 5, CASL Technical Report: CASL-U-2013-0273-000, November 30, 2013.
>Kochunas, B., D. Jabaay, B. Collins and T. Downar, Coupled Single Assembly Solution with COBRA-TF/MPACT (Problem 6), CASL Technical Report: CASL-U-2013-0280-000, November 30, 2013.
- Asher, I., and K. Fidkowski, A Study of the Role of Adjoint-Equipped CFD in VUQ Analysis of Channel Boiling Simulations, CASL Technical Report: CASL-U-2013-0192-000, November 21, 2013.
- Lu, J., and G. Tryggvason, Transient Evolution of Bubbles in a Channel, CASL Technical Report: CASL-U-2014-0040-000, November 20, 2013.
- Sieger, M., VERA Release Notes ID: 2013 VERA RSICC Release (VERA 3.2), CASL Technical Report: CASL-U-2014-0172-000, November 16, 2013.
- Romano, P., and B. Forget, Tally Server Implementation in OpenMC, CASL Technical Report: CASL-2013-0215-000, October 24, 2013.
- O’Brien, C., Z. Rak and D. Brenner, Free Energies of (Co, Fe, Ni, Zn) Fe2O4 Spinels and Oxides in Water at High Temperatures and Pressure from Density Functional Theory: Results for Stoichiometric NiO and NiFe2O4 Surfaces, CASL Technical Report: CASL-I- 2014-0184-000-a, October 8, 2013.
- Abdel-Khalik, H.S., R. Smith and C. Webster, Development of Hybrid Order Reduction Methods for Uncertainty Quantification, CASL Technical Report: CASL-U-2014-0028-000, September 30, 2013.
- Crane, N.K., Modal Dynamics Analysis Demo with Sierra, CASL Technical Report CASL-U-2013-0283-000, September 30, 2013.
- Dinh, N., Validation Data Needs Survey, CASL Technical Report: CASL-U-2013-0194-001, September 30, 2013.
- Doster, M., Assessment of the Performance of COBRA-TF for the Prediction of Subcooled Boiling Conditions in Rod Bundles, CASL Technical Report: CASL-U-2013-0201-000, September 30, 2013.
- Godfrey, A., RSICC Release Testing Results Summary, CASL Technical Report: CASL-U-2014-0009-000, September 30, 2013.
- Hassan, Y., Experimental Investigation of Subcooled Flow Boiling, CASL Technical Report: CASL-U-2013-0214-000, September 30, 2013.
- Kendrick, B., V. Petrov, D. Walter and A. Manera, CILC Studies with Comparative Analysis to Existing Plants, CASL Technical Report: CASL-U-2013-0224-000, September 30, 2013.
- Petrov, V., and A. Manera, Implementation and Validation of the New RPI Boiling Models Using STAR-CCM+ as CFD Platform, CASL Technical Report: CASL-U-2013-0193-000, September 30, 2013.
- Samaroo, R., M. Kawaji, T. Yabuki and N. Osamu, MEMS Sensor Measurement of Surface Temperature Response during Subcooled Flow Boiling in a Rectangular Flow Channel, CASL Technical Report: CASL-U-2013-0211-000, September 30, 2013.
- Smith, T., J. Shadid, R. Pawlowski, E. Cyr and T. Wildey, Thermal Hydraulic Simulations, Error Estimation and Parameter Sensitivity Studies in Drekar::CFD, CASL Technical Report: CASL-U-2013-0203-001, September 30, 2013.
- Williams, B., L. Pritchett-Sheats, K. Copps, L. Swiler and E. Prudencio, Separate Effects V&V for Hydra-TH, CASL Technical Report: CASL-U-2013-0213-000, September 30, 2013.
- Xia, Y., H. Luo, J. Bakosi, M. Christon and L. Pritchett-Sheats, Hydra-TH Milestone Report, CASL Technical Report: CASL-U-2013-0198-000, September 30, 2013.
- Bakosi, J., M. Christon, L. Pritchett-Sheats, H. Lou, Y. Xia and R. Nourgaliev, Hydra-TH Verification, Validation and Thermal-Hydraulics Benchmark Problems, CASL Technical Report: CASL-U-2013-0209-000, September 16, 2013.
- Abdel-Khalik, H., J. Hite, R. Smith, M. Wentworth, E. Prudencio and B. Williams, Uncertainty Quantification and Data Assimilation (UQ/DA) Study on a VERA Core Simulator Component for CRUD Analysis, CASL-U-2013-0184-000, August 30, 2013.
- Carpenter, J., N. Belcourt and R.R. Nourgaliev, General Purpose Steam Table Library, CASL Technical Report CASL-U-2013-0188-000, August 30, 2013.
- Gilman, L., and E. Baglietto, Advancements on Wall Boiling Modeling in CFD: Leveraging New Understanding From MIT Flow Boiling Facility, CASL Technical Report: CASL-U-2013-0185-000, August 30, 2013.
- Podowski, M., RPI L3 Milestone Report: Summary of Milestone Accomplishments and Lessons Learned, CASL Technical Report: CASL-U-2013-0204-000, August 30, 2013.
- Gehin, J., A. Godfrey, F. Franceschini, T. Evans, B. Collins and S. Hamilton, Operational Reactor Model Demonstration with VERA: Watts Bar Unit 1 Cycle 1 Zero Power Physics Test, CASL Technical Report: CASL-U-2013-0105-001, August 23, 2013.
- Pawlowski, R.P., J. Turner, S. Palmtag and R. Montgomery, Initial Demonstration of Peregrine in VERA-CS, CASL Technical Report: CASL-U-2013-0165-000, July 31, 2013.
- Palmtag, S., Coupled Single Assembly Solution with VERA (Problems 6), Revision 1, CASL Technical Report: CASL-U-2013-0150-001, July 25, 2013.
- Turner, J., Virtual Environment for Reactor Applications (VERA): Snapshot 3.1, CASL Technical Report: CASL-U-2013-0164-000, July 24, 2013.
- Andersson, D.A., and C.R. Stanek, Mixing and Non-Stoichiometry in Fe-Ni-Cr-Zn-O Spinel Compounds: Density Functional Theory Calculations, CASL Technical Report: CASL-U-2013-0145-000, July 22, 2013.
- Alankar, A., and C. Tome, Development of a Plastic Deformation Model of Irradiated Zircaloy for Addressing LOCA Conditions, Los Alamos National Laboratory Internal Report (LA-UR-13-25085), July 13, 2013.
- Abdel-Khalik, H.S., R.C. Smith and C. Websters, Multi-physics UQ Hybridization Framework Development, CASL Technical Report: CASL-U-2014-0028-000-a, July 11, 2013.
- Bessmann, T., Implementation of More Complete Thermochemical Database in MAMBA, CASL Technical Report: CASL-U-2013-0121-000, June 28, 2013.
- Fang, J., J. Lu, A. Thomas, I. Bolotnov and G. Tryggvason, ITM/DNS Database of Drag, Lift and Wall Effects, Including the Effects of Void Fractions, CASL Technical Report: CASL-U-2013-0062-001, June 26, 2013.
- Godfrey, A., Westinghouse Test Stand Technical Readiness Review, CASL Technical Report: CASL-U-2013-0117-000-a, June 25, 2013.
- Nourgaliev, R., M. Christon, J. Bakosi and A. Bui, Newton-Krylov Based P2 Projection Solver for Fluid Flows, INL/EXT-13-28278, June 17, 2013.
- Guion, A., G. Rabello, C. Narayanan and J. Buongiorno, Closure Relation for Microlayer Evaporation in Nucleate Boiling, and its Application to ITM Test Case 3b, CASL Technical Report: CASL-U-2013-0140-000, June 1, 2013.
- Sunny, E.E., On-the-Fly Generation of Differential Resonance Scattering Probability Distribution Functions for Monte Carlo Codes, May 5, 2013.
- Hess, S., and R. Montgomery, VERA Release Plan Revision 1, CASL Technical Report: CASL-U-2013-0146-000, April 26, 2013.
- Yan, F., Fibrous Debris Pilot Simulation, Technical Report: FFT-13-34, April 16, 2013.
- Evans, T.M., Evaluating the Denovo SPN Discretization, CASL Technical Report CASL-U-2014-0083-000, April 5, 2013.
- Evans, T.M., Evaluating the Denovo SPN Discretization, Rev. 1, CASL Technical Report: CASL-U-2014-0083-000, April 5, 2013.
- Carpenter, J., and N. Belcourt, Tabular Water Properties Interface for Hydra-TH: CASL THM.CFD.P6.03, CASL Technical Report: CASL-U-2013-0087-000 (SAND2013-SAND2697 463468), April 1, 2013.
- Mousseau, V., B. Adams, K. Ivanov, M. Avramova, R. Salko and T. Blyth, Apply VUQ Practices with Dakota to COBRA-TF for AMA-Relevant Problems, SAND2013-SAND3093, April 1, 2013.
- Wildey, T., E. Cyr, J. Shadid, R. Pawlowski and T. Smith, A Comparison of Adjoint and Data-Centric Verification Techniques, CASL Technical Report: CASL-U-2013-0223-000, March 31, 2013.
- Turner, J., R. Summers and S. Palmtag, Virtual Environment for Reactor Applications (VERA), CASL Technical Report: CASL-U-2014-0006-000, March 29, 2013.
- Bakosi, J., M.A. Christon, L. or. Pritchett-Sheats, H. Luo, T. Xia and R. Nourgaliev, Hydra-TH Verification, Validation and Thermal-Hydraulics Benchmark Problems (LA-UR-13-22017), CASL Technical Report: CASL-U-2013-0324-000-b, March 28, 2013.
- Bui, A., and N. Dinh, Quantification of Data Needs, Data Collection and Characterization to Support Validation and Calibration of Subcooled Flow Boiling Model, INL/EXT-13-28709, March 28, 2013.
- Jokisaari, A.M., and K. Thornton, Demonstration of Hyrax Capabilities, CASL Technical Report: CASL-U-2013-0346-000, March 28, 2013.
- Xia, Y., and H. Luo, Hydra-TH Milestone Report, CASL Technical Report CASL-U-2013-0324-000, March 28, 2013.
- Pernice, M., and M. Sieger, Survey of Software Quality Assurance and Code Verification Practices in CASL, CASL Technical Report: CASL-U-2013-0079-000, INL/EXT-13-28675, March 26, 2013.
- Bakosi, J., M.A. Christon and R.R. Nourgaliev, Newton-Krylov based P2 Projection Solver for Fluid Flows, CASL Technical Report: CASL-U-2013-0288-000-b, February 12, 2013.
- Bakosi, J., M.A. Christon, L. Pritchett-Sheats and R.R. Nourgaliev, Hydra-TH Advanced Capabilities, CASL Technical Report CASL-U-2013-0288-000, February 1, 2013.
2012
- Godfrey, A., F. Franceschini, S. Palmtag and J. Stout, Analysis of Two-Dimensional Lattice Physics Verification Problems with MPACT, CASL Technical Report: CASL-U-2012-0172-000, December 21, 2012.
- Salko, R., M. Avramova, R. Schmidt, S. Palmtag and R. Hooper, Suggestions for COBRA-TF Parallelization and Optimization, CASL Technical Report: CASL-U-2013-0003-000, December 21, 2012.
Bakosi, J., M.A. Christon, L. or. Pritchett-Sheats, H. Luo, T. Xia and R.R. Nourgaliev, Hydra-TH Verification Problems, December 14, 2012.
Subramanian, G., D. Perez, B. Uberuaga, C. Tome and A. Voter, Progress Report on the Incorporation of Lower Lengthscales into Polycrystal Plasticity Models. Part II: LA-UR 12-25613, Los Alamos Report LA-UR 12-25613, November 30, 2012.
- Subramanian, G., and C. Tome, Progress Report on the Incorporation of Lower Lengthscales into Polycrystal Plasticity Models. Part I: LA-UR 12-25612, Los Alamos Report LA-UR 12-25612, November 30, 2012.
- Doster, M., and M. Thames, Grid Sensitivity Study of CFD versus COBRA, CASL Technical Report: CASL-U-2012-0171-000, November 27, 2012.
- Martin, W., Implementation of On-the-Fly Doppler Broadening in MCNP5 for Multiphysics Simulation of Nuclear Reactors, Project No. 10-897, November 1, 2012.
- Shadid, J., T. Smith, R. Pawlowski, E. Cyr and P. Weber, RANS CFD Simulations for CASL THM Using Drekar:: CFD, CASL Technical Report: CASL-U-2012-0164-000, October 31, 2012.
- Bolotnov, I., Informing the Development of Multiphase CFD Models using Bubbly Turbulent Flow Interface Tracking Results, CASL Technical Report: CASL-U-2012-0156-000, September 30, 2012.
- Bui, A., T.N. Dinh, R.R. Nourgaliev and R.W. Youngblood, Two-Phase Flow and Heat Transfer Model Calibration and Code Validation: A Subcooled Boiling Flow Case Study, CASL Technical Report: INL/CON-12-27859, September 30, 2012.
- Wildey, T., E. Cyr, R. Pawlowski, J. Shadid and T. Smith, Adjoint Based a Posteriori Error Estimation in Drekar:: CFD, CASL Technical Report: CASL-U-2013-0178-000-a, Sandia Report SAND2012-SAND8910, September 30, 2012.
- Young, M., J. Jarrell and T. Evans, Method of Characteristics Assisted Cross Section Homogenization for Denovo (Rev. 1), CASL Technical Report: CASL-U-2012-0159-000, RNSD-TN-12-0001, September 30, 2012.
- Asher, I., T. Drzewiecki, T. Grunloh, V. Petrov, K. Fidkowski and A. Manera, Sensitivity, Verification, and Validation Studies of STAR-CD, STAR-CCM+, and Nphase CFD Boiling Models, CASL Technical Report: CASL-U-2012-0163-000, September 29, 2012.
- Nourgaliev, R., M. Christon and J. Bakosi, Notes on Newton-Krylov based Incompressible Flow Projection Solver, CASL Technical Report: CASL-U-2012-0155-000, INL/EXT-12-27197, September 29, 2012.
- Nourgaliev, R., M. Christon and J. Bakosi, Solution Algorithms for Multi-Fluid-Flow Averaged Equations, CASL-U-2012-0155-000-a, INL/EXT-12-27187, September 29, 2012.
- Bui, A., and N. Dinh, Validation Data Plan Implementation: Subcooled Flow Boiling Case Study, CASL Technical Report: CASL-U-2012-0162-000, September 28, 2012.
Adams, B., M. Eldred, P. Hough and L. Swiler, DAKOTA Training: DAKOTA 101, Overview and Wrap-Up, Sandia National Laboratories Technical Report, SAND2012-SAND7388 P, September 1, 2012.
Adams, B.D., M. Eldred, P. Hough and L. Swiler, DAKOTA Training: DAKOTA 101, Optimization and Calibration, Sandia National Laboratories Technical Report, SAND2012-SAND7388 P, September 1, 2012.
Adams, B.D., M. Eldred, P. Hough and L. Swiler, DAKOTA Training: DAKOTA 101, Sensitivity Analysis and Uncertainty Quantification, Sandia National Laboratories Technical Report, SAND2012-SAND7387 P, September 1, 2012.
Adams, B., M.S. Eldred, P. Hough and L.P. Swiler, DAKOTA Training: Advanced Topics, September 1, 2012.
- Rider, W., and J. Kamm, Advanced Solution Verification of CFD Solutions for LES of Relevance to GTRF Estimates, CASL Technical Report: CASL-U-2012-0132-000, August 31, 2012.
- Christon, M.A., J. Bakosi and R.B. Lowrie, Hydra-TH User’s Manual, Version: LA-UR-12-23181, CASL Technical Report: CASL-U-2012-0075-000-b, July 19, 2012.
- Eldred, M., and T. Wildey, Propagation of Model Form Uncertainty for Thermal Hydraulics using RANS Turbulence Models in Drekar, CASL Technical Report: CASL-U-2012-0080-000, June 30, 2012.
- Bakosi, J., N. Barnett, M.A. Christon, M.M. Francois, R.B. Lowrie and R. Sankaran, Integration of Hydra-TH in VERA, CASL Technical Report CASL-U-2012-0075-000, June 22, 2012.
- Barashev, A.V., S.I. Golubov and R.E. Stoller, Theoretical Investigation of Microstructure Evolution and Deformation of Zirconium under Cascade Damage Conditions, ORNL/TM-2012/225, June 22, 2012.
- Barashev, V.A., I.S. Golubov and R.E. Stroller, Theoretical Investigation of Microstructure Evolution and Deformation of Zirconium under Neutron Irradiation, CASL Technical Report: CASL-U-2013-0208-000, June 1, 2012.
- Samolyuk, G.D., S.I. Golubov, Y.N. Osetsky and R.E. Stoller, DFT Study Revises Interstitial Configurations in HCP Zr, ORNL/TM-2011/516, June 1, 2012.
- Wirth, B., C.R. Stanek, R. Montgomery, R. Williamson, J. Hales, D.R. Gaston, R.C. Martineau, D. Sunderland, J. Rashid, B.K. Kendrick, M.P. Short, K. Edsinger and D. Hussey, High Fidelity Fuel Performance Model Development: Focus on Benchmark & Validation activities for PCI and CRUD, CASL Technical Report: CASL-U-2012-0054-000, April 2, 2012.
Caviezel, D., and D. Lakehal, TransAT Sensitivity Studies: From Laminar Flow Past Circular Cylinders to LES of Test Case 2, CASL report 2, ASCOMP Internal Report, TRS-V/1-2012, April 1, 2012.
- Banta, J., CASL Enterprise Project Management (EPM) Tool, a Unified PM Platform, CASL Technical Report: CASL-U-2012-0052-000, March 31, 2012.
- Davidson, G., Demonstrate Initial Deterministic Transport Capability through VERA-CS, CASL Technical Report: CASL-U-2012-0245-000, March 31, 2012.
- Li, T., P. Nath, N.K. Crane and T.L. Sham, Enhancement of GTRF Modeling Fidelity, CASL Technical Report: CASL-U-2012-0237-000, March 31, 2012.
- Yan, J., P. Yuan, Y. Xu, Z. Karoutas, E. Popov, S. Pannala, A.K. Stagg, S. Lucas, H. Zhang, R. Brewster, E. Baglietto, E. Dominguez-Ontiveros and Y.A. Hassan, Thermal Hydraulic Validation Report, CASL Technical Report: CASL-U-2012-0037-000, March 31, 2012.
- Godfrey, A., Industry Council Workflow Project: Final Report, CASL Technical Report: CASL-U-2011-0236-002, March 30, 2012.
- Hess, S., VERA Requirements Document (VRD) – Revision 1, CASL Technical Report: CASL-U-2011-0074-002, March 30, 2012.
- Dinh, N., CRUD-Induced Power Shift (CIPS) Validation Data Plan (INL-EXT-12-253470, March 29, 2012.
- Zhang, H., Review of Experiments for CASL Neutronics Validation, CASL Technical Report: CASL-U-2012-0039-000, March 29, 2012.
- Jarrell, J., A. Godfrey, T. Evans and G. Davidson, Full Core Reactor Analysis: Running Denovo on Jaguar, CASL Technical Report: CASL-U-2012-0041-000, March 13, 2012.
- Hess, S., Evaluation of Industry Council Pilot Project Alternatives, CASL Technical Report: CASL-U-2012-0026-000, February 29, 2012.
- Chatzikyriakou, D., J. Buongiorno and C. Narayanan, Solution Verification Applied to TransAT Large Eddy Simulations for Smooth Wall Channel Flow With Periodic Boundary Conditions, Rev 1, CASL Technical Report: CASL-U-2011-0184-001, February 28, 2012.
- Bolotnov, I., C. Estrada-Perez and Y. Hassan, ITM Simulations of Subcooled Flow Nucleate Boiling Experiment at TAMU, CASL Technical Report: CASL-U-2012-0012-000, January 31, 2012.
- Zhang, H., Power Uprate Limitation Assessment, CASL Technical Report: CASL-U-2012-0011-000, January 31, 2012.
- Gehin, J., S. Hess, Z. Karoutas and R. Montgomery, Proposed Test Stand Selection Criteria, CASL Technical Report: CASL-U-2012-0146-000, January 23, 2012.
- Kendrick, B.K., D. Walter, B.S. Collins, V. Petrov, A. Manera and T. Downar, Proof-of-concept of DeCART/STAR-CCM+/MAMBA Coupled Simulation for the Prediction of Crud Deposition on a Fuel Pin with Grid Spacers, CASL Technical Report: CASL-U-2012-0045-000, January 20, 2012.
2011
- Adams, B., Y. Sung and J. Secker, Sensitivity and Uncertainty Analysis for CIPS with VIPRE-W and BOA, CASL Technical Report: CASL-U-2011-0171-000, (SAND 2011-9445 TRN: US1201897), December 31, 2011.
- Christon, M., J. Bakosi, N. Barnett., M. Francois and R. Lowrie, Initial Assessment of Hydra-TH on Grid-to-Rod Fretting Problems, CASL Technical Report: CASL-U-2011-0242-001, December 22, 2011.
- Christon, M.A., J. Bakosi and R.B. Lowrie, Hydra-TH User’s Manual, CASL Technical Report: CASL-U-2012-0075-000-b (LA-UR-12-23181), December 1, 2011.
- Adams, B., W. Bohnhoff, K. Dalbey, J. Eddy, M. Eldred, P. Hough, S. Lefantzi and L. Swiler, DAKOTA: A Multilevel Parallel Object-Oriented Framework for Design Optimization, Parameter Estimation, Uncertainty Quantification, and Sensitivity Analysis: Version 5.2 User’s Manual, SAND2010-SAND2183, Sandia National Laboratories SAND Report, November 30, 2011.
- Golubov, S.I., A.V. Barashev and R.E. Stroller, On the Origin of Radiation Growth of HCP Crystals, ORNL Report: ORNL/TM-2011/473, November 1, 2011.
- Copps, K., High-Order Quantitative Model Validation Metrics Integrating Experimental and Computational Data for Large-Scale Time-Independent Nonlinear Systems, CASL Technical Report: CASL-U-2011-0196-000-a, October 31, 2011.
Bartlett, R., LIME 2.0 Architecture and Design: Version 0.5 (Rev. 1), CASL Technical Report: CASL-U-2011-0167-000, September 30, 2011.
- Bolotnov, I.A., ITM Benchmark #1: PHASTA Results, CASL Technical Report: CASL-U-2011-0185-000, September 30, 2011.
- Eldred, M., Investigation of Advanced UQ for CRUD Prediction with VIPRE, CASL Technical Report: CASL-U-2011-0194-000, September 30, 2011.
- Godfrey, A., VERA Core Physics Benchmark Progression Problem Specifications, Revision 4, CASL Technical Report: CASL-U-2012-0131-004, September 30, 2011.
- Lowrie, R.B., M.A. Christon, N. Barnett, J. Bakosi and M.M. Francois, Hydra-TH L3 Milestone (L3:THM.CFD.P3.02), CASL Technical Report: CASL-U-2011-0183-000, September 30, 2011.
- Stewart, J., CASL Uncertainty Quantification Roadmap, CASL Technical Report: CASL-U-2011-0195-000, September 30, 2011.
- Turner, J., N. Belcourt, R. Hooper, R. Pawlowski and R. Schmidt, An Introduction to LIME1.0 and its Use in Coupling Codes for Multiphysics Simulations, CASL Technical Report: CASL-U-2011-0017-002, SAND2011-SAND8524, September 30, 2011.
Baker, C., R. Bartlett, K. Clarno, B. Collins, T. Evans, R. Pawlowski, R. Schmidt and J. Turner, Domain Model Specification for VERA: Version 1.0 (September 2011) (Rev 1), CASL Technical Report: CASL-U-2011-0169-000, September 11, 2011.
Kendrick, B.K., and M.P. Short, A 2D, High Resolution, Coupled Demonstration and Assessment of the Crud Challenge Problem, CASL Technical Report: CASL-U-2011-0175-000, August 26, 2011.
- Lowrie, R.B., Summary of THM Meeting with EDF, CASL Technical Report CASL-U-2011-0281-000, August 24, 2011.
- Kothe, D., CASL Round Table Meeting, CASL Technical Report CASL-U-2011-0072-000, August 9, 2011.
- Rider, W., Solution Verification Applied to Drekar and Fuego Calculations using of Grid-to-Rod-Fretting (GTRF), CASL Technical Report: CASL-U-2011-0192-000, July 31, 2011.
Rosa, M., Advanced Transport Methods for Nuclear Reactor Simulations, Poster Presentation, Nuclear Engineering and Technology Capability Review at LANL, Los Alamos National Laboratory Report LA-UR-11-02783, July 27, 2011.
- Cacuci, D., Best Estimate plus Reduced Uncertainties (BERU) Predications, CASL Technical Report: CASL-U-2011-0055.000, June 30, 2011.
- Downar, T., B. Kochunas, R. Brewster and E. Baglietto, Full-core 3D MOC Transport (2D/1D, Pin-resolved) Capability with T-H Coupling, CASL Technical Report: CASL-U-2011-0075-000, June 30, 2011.
- Rodriquiz, S., and D. Turner, Assessment of Existing Sierra/Fuego capabilities Related to Grid-to-Rod-Fretting (GTRF), CASL Technical Report: CASL-U-2011-0023-000, SAND-2012-0530, June 30, 2011.
- Copps, K., Open Source the Percept Software and Demonstrate Verfiication of the Gred-to-Rod Fretting Problem, CASL Technical Report: CASL-U-2011-0019-000, June 20, 2011.
- Tome, C.N., and T. Sham, Polycrystal Modeling of Irradiation and Thermal Creep of Cladding, LANL Internal Report, May 17, 2011.
- Szilard, R., NEAMS VU and CASL VUQ: Strategic Goals, Priorities, and Leveraging Opportunities, CASL Technical Report: CASL-U-2011-0001-000, April 30, 2011.
- Williams, B., B. Adams, Y. Sung and W. Witkowski, Demonstration of Validation Methodology Applied to VIPRE-W Boiling Index Calculations, Los Alamos National Laboratory Report LA-UR-11-02470, April 25, 2011.
- Evans, T.M., 3D SN Transport, CASL Technical Report: CASL-U-2011-0018-000, April 6, 2011.
- Tryggvason, G., R. Scardovelli and S. Zaleski, Direct Numerical Simulations of Gas-Liquid Multiphase Flows, April 1, 2011.
- Adams, B.D., W. Witkowski and Y. Sung, Enable Statistical Sensitivity and UQ Demonstrations for VERA, CASL Technical Report: CASL-U-2011-0049-000, March 31, 2011.
- Evans, T.M., G. Davidson and J. Jarrell, Design of a Neutronics Package for Multi-Physics Reactor Calculations (Rev. 1), CASL Technical Report: CASL-U-2011-0017-000-b, March 31, 2011.
- Pawlowski, R., R. Bartlett, N. Belcourt, R. Hooper and R. Schmidt, A Theory Manual for Multi-physics Code Coupling in LIME, Version 1.0, Sandia National Laboratory Report, SAND 2011-2195, March 31, 2011.
- Turner, J., T. Evans, G. Davidson and J. Jarrell, Design on Neutronics Package for Multi-Physics Reactor Calculations, CASL Technical Report: CASL-U-2011-0017-000-b, RNSD-TN-11-004, March 31, 2011.
- Turner, J., CASL VERA SQA Plan, CASL Technical Report: CASL-U-2011-0017-000-d, March 31, 2011.
- Turner, J., R. Schmidt, R. Bartlett, N. Belcourt, R. Hooper and R. Pawlowski, A Theory Manual for Multi-Physics Code Coupling in LIME, CASL Technical Report: CASL-U-2011-0017-000, SAND2011-SAND2195, March 31, 2011.
- Dinh, N., CASL Validation Data: An Initial Review, CASL Technical Report: CASL-U-2011-0020-000, INL Publication, INL/EXT-11-21017, January 31, 2011.
- Adams, B., W. Bohnhoff, K. Dalbey, J. Eddy, M. Eldred, P. Hough, S. Lefantzi and L. Swiler, DAKOTA: A Multilevel Parallel Object-Oriented Framework for Design Optimization, Parameter Estimation, Uncertainty Quantification, and Sensitivity Analysis: Version 5.2 Reference Manual, SAND2011-SAND9106, Sandia National Laboratories SAND Report, January 26, 2011.
- Adams, B., W. Bohnhoff, K. Dalbey, J. Eddy, M. Eldred, P. Hough, S. Lefantzi and L. Swiler, DAKOTA: A Multilevel Parallel Object-Oriented Framework for Design Optimization, Parameter Estimation, Uncertainty Quantification, and Sensitivity Analysis: Version 5.2 Theory Manual, SAND2011-SAND9106, Sandia National Laboratories SAND Report, January 26, 2011.
2010
- Rider, W., Verification, Validation and Uncertainty Quantification Workflow in CASL, CASL Technical Report: CASL-U-2010-0023-000, SAND Report SAND2010-SAND2234P, December 30, 2010.
- Rider, W., Verification, Validation and Uncertainty Quantification Workflow in CASL, CASL Technical Report: CASL-U-2010-0023-000, SAND Report SAND2010-SAND2234P, December 30, 2010.
- Rider, W., J. Kamm and G. Weirs, Code Verification Workflow in CASL, CASL Technical Report: CASL-U-2010-0023-000-a, SAND Report SAND2010-SAND7060P, December 30, 2010.
- Rider, W., and J. Kamm, Procedures for Calculation Verification, CASL Technical Report: CASL-U-2010-0023-000-b, December 30, 2010.
- Berry, R., Some Specific CASL Requirements for Advanced Multiphase Flow Simulation of Light Water Reactors, INL/EXT-10-20529, November 30, 2010.
- Schmidt, R., Introduction to LIME: A Lightweight Integrating Multi-physics Environment for Coupling Codes, CASL Technical Report: CASL-U-2010-0006-000, October 29, 2010.
